Workshop or warehouse cladding
For local facade-panel replacement, show the panel dimensions and fixing position. Suitability depends on access to the joint, vehicle position and permitted platform load.
For work beside a workshop or detached building in Ohangaron District, send an overview of the approach. If the parking position is at a different level from the facade base, report that difference with the working height.
45 mOhangaron District is a district of Tashkent Region. Include the settlement, mahalla and site coordinates to distinguish the entrance from similarly named or neighbouring addresses.

For local facade-panel replacement, show the panel dimensions and fixing position. Suitability depends on access to the joint, vehicle position and permitted platform load.
Roof-edge access requires eaves height and the proposed parking position. For a point behind a parapet or further onto the roof, mark its setback from the edge and any obstacles.
For cable routes, ventilation or other facade-mounted services, state the working length. Show crossings with canopies, pipes or wires where they may affect boom movement.
Send the address, work height and photos of the facade, access route and lift parking space.
Message on TelegramNot necessarily. Facade length and distances to end points are assessed against boom geometry. Show access along the building so possible repositioning can be discussed.
That depends on height, edge setback, parapet and vehicle position. A working height of up to 45 m does not imply the same horizontal reach.
The address locates the building, not a suitable setup position. Photos, height, setback and obstacles are needed; the work sequence is agreed with the site representative.
Describe the job and send a photo of the work area.